LOOPEREYE-B puts the power of a digital audio workstation at your feet. You can use it standalone, or connected to an easy to use and interactive Android/iOS app to get the full experience. It’s super easy to set up and use and so flexible you can create your own looper on the go, wherever you are.

You can connect your guitar or other instruments to the high-quality audio interface. Microphones are also supported and you can tune the input gain. There is MIDI support using the standard TRS, USB, or over WiFi.

A mixing studio feature and an embedded synthesiser are included for you to record, mix and share or post your songs in a super easy way.

You can create multiple button banks combining tons of available commands and then change the action of each footswitch on the fly, so instead of having four fixed footswitches, you have a virtually infinite set of options defined by you.

And all of this comes in a super portable bulletproof stomp box you can easily integrate in your pedalboard!


Multiple Tracks

Independent mono and stereo tracks to build your song up, with massive length for your loops!

High Quality Audio

High quality stereo inputs and outputs, with tunable input gain


Tons of commands changeable on the fly, standalone mode, multiple synchronisation sources, embedded synthesiser, and much more!

Android/iOS App

Visualise and control your loops and sessions with your smartphone or tablet by using our intuitive app

Mixing Studio feature

Record the progression of your loops as a full mixed song to share on social media and other

Save and load sessions

Save and load your loops sessions, including audio and configuration, so you don't loose those moments of inspiration


  • Up to 16 mono or stereo tracks
  • Add and remove tracks on the fly
  • Total looping time in a single session: 40 minutes
  • Synchronisation sources:
    • Track 1 with automated threshold
    • MIDI clock
    • Metronome
    • None
  • Synchronisation mode selectable per track:
    • Relative
    • Absolute
    • None
  • Quantization:
    • Track
    • Beat
    • Bar
  • Internal metronome with TAP command
  • Record, mix, and share songs (live progression)
  • Save and load sessions and songs, with up to 8GB of internal storage
  • Song mode: Specify your song progression (*)
  • Independent controls per track:
    • Volume
    • Panning
    • Rate
    • Play/pause/solo/mute
    • Etc.
  • 24-bits Stereo I/O:
    • TS jacks 6.35mm (1/4”)
    • 48kHz sample rate
    • 114dB dynamic range
    • Flat response at 20-20kHz
  • Input impedance: 500kΩ
  • Output impedance: 470Ω
  • Tunable gain per audio channel:
    • Line/Inst mode: 0dB
    • Mic mode: 10.4dB
  • Output as Mono when only one output connected
  • IEEE 802.11 b/g/n WiFi Acces Point
  • Antenna connector (SMA)
  • Dual USB 2.0 host Type A, they can provide up to 500mA each
  • MIDI TRS RP-054 I/O
  • Multicast transport MIDI over WiFi input
  • RGB status LED
  • 9VDC/2A 2.10mm ID (0.083"), 5.50mm OD (0.217"), Negative Center
    • Power Supply
  • 4 low-force metal footswitches:
    • Changeable on the fly
    • Configurable action on-press, and on-hold or on-release
  • Die-cast aluminium stombox
  • Dimensions: 187.5 x 119.5 x 37mm (7.38” x 4.7” x 1.46”)
  • Weight: 734g (1.62lbs)
  • Embedded synthesiser with 8 pre-loaded channels, controllable via MIDI TRS, USB-MIDI, and MIDI WiFi
  • Multi-user enabled
  • Easy firmware updates via app

(*) Available in future releases by firmware update